This fully automatic curtain pinch pleating device is equipped with a robotic arm to hold the curtain panel as a whole. It will automatically pleat the material in a vertical direction and rotate 90 degrees before finally pushing the pleated material forward toward the sewing head. This removes the need for the operator to control feed and hold the materials.

Also equipped with an “Automatic Curtain Pleat Calculation Module” that allows the operator to input the curtain panel’s original width, pleat numbers, preferred pleat distance, and some other parameters, as well as the targeted finished width after pleating on the Touch Screen control panel. Then the computer module will automatically calculate the parameters based on the operator’s required measurement, and then the pleating device will adjust automatically depending on the parameters from the curtain pleat calculated values.

Further adopts the use of pleat distance allowance by recalculating the actual distance and leftover materials on the last few pleats in order to achieve a more accurate pleat distance and side edge of the fabric to be the same as the other side of the panel.

Note: An Air compressor is required